![]() And if the silo needs to be moved, it can also be dismantled. ![]() The construction cycle of our cement silos is short because the silo walls can be molded during the manufacturing process and then installed on site.Materials can be stored in this environment for a longer time. In our silos, the storage life of the material is longer because the wall of our cement silos is tightly occluded and close to a vacuum, the sealing effect is much better than that of traditional warehouses.When discharging is needed, first open the manual unloading valve at the bottom of the silo, and then transfer the material out through the conveying machine. We can observe the material quantity in cement silo through the material level control system.Once the filter bag is blocked, the pressure in the silo will exceed the safe pressure value of the safety valve at the top of the cement silo, and then the safety valve will open to release the pressure and prevent the occurrence of explosion accident.In the process of conveying materials, the operator should press the button of the dust collector vibration motor without interruption to shake off the materials attached to the filter bag for preventing the bag from blocking.After the cement silo is fixed, connect the conveying pipeline of the raw material truck with the feeding pipeline of the cement silo and deliver the raw materials to cement silo through the gas pressure produced by raw material truck.After the cement silo body is assembled, the crane will lift it and place it on the pre-installed concrete foundation, and then weld the bottom with the embedded parts of the foundation firmly.When the diameter of the conical bottom silo is large, the upper beam of the supporting structure is greatly increased so its construction cost can be more than 40% higher than flat bottom silo with the same capacity. However, from an economic point of view, the application of conical bottom silo has some limitations. The flat bottom is used for cement silos with a diameter greater than 10m.įrom the perspective of technology and use, the conical bottom is a better choice, because it has the advantage of no need for silo cleaning equipment. The conical bottom is usually used for cement silos with a diameter less than 10m and storage capacity not exceeding 1500t. The bottom of cement silo can be divided into the flat bottom and conical bottom. The steel cement silo produced by AGICO is mainly composed of silo roof, silo body, silo bottom, silo support structure, foundation, and some other components, such as material level control device, dust collector, automatic control system, ladder, safety fence, access door, feeding port, air hole, etc. Its construction method can be divided into mounting type, welding type, and spiral flanged type. Because of its lightweight, low cost, a high degree of standardization, short construction period, and industrialized production, it is more favored by customers. The galvanized iron sheet is the main material for constructing steel cement silo. Prefabricated slab or cast-in-place cement is often used to build the silo roof. The body of brick cement silo is made of brick, and its height is usually no more than 20 meters. This type of cement silo has high construction costs and a long construction period. The diameter of reinforced concrete silos is usually 6-8 meters. From the perspective of materials, the commonly used cement silos include reinforced concrete silos, brick cement silos, and steel cement silos. Due to the different manufacturing materials and construction methods, cement storage silos can be divided into various types.
0 Comments
Leave a Reply. |